1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZBI Commands
  3. AUXPORT_SETPIN
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
AUXPORT_SETPIN

AUXPORT_SETPIN

This function sets the output level on an applicator pin.
Format
AUXPORT_SETPIN
(X,Y)
Parameters
X
 = perform action on this applicator port pin.
Y
 = The value to set on the pin (1 = high, 0 = low).
Returns
This function returns -1 upon failure and 0 upon success.
Example
Comments
If this pin is not controlled via ZBI (power pin), this function will return -1. See AUXPORT_STEALPIN.