1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. SGD Wireless Commands
  3. ip.pop3.username
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
ip.pop3.username

ip.pop3.username

This printer setting refers to the POP3 user name. This only applies if the "
ip.pop3.enable
" is set to on.

Setvar

To change the POP3 user name:
! U1 setvar "ip.pop3.username" "value"
Values
A maximum of 20 alphanumeric characters
Default
""

Getvar

To respond with the POP3 user name:
! U1 getvar "ip.pop3.username"
Example
This
setvar
example shows the value set to
"user"
. 
! U1 setvar "ip.pop3.username" "user"
When the
setvar
 value is set to
"user"
, the
getvar
 result is
"user"
.