1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Commands
  3. ^JH
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^JH

^JH

The
^JH
 command configures the early warning messages that appear on the LCD.

Early Warning Settings

  • ZE500 series
  • Xi
    III,
    Xi
    III
    Plus
    , Xi4, RXi4
  • PAX
    3,
    PAX
    4
  • ZM400, ZM600, RZ400, RZ600
  • S4M
  • G-Series (“f” parameter only)
Format:
^JHa,b,c,d,e,f,g,h,i,j
Parameter
Details
a =
 early warning media
a
 = supplies warning (Xi4 and RXi4 printers only)
This parameter is for XiIIIPlus, Xi4, RXi4, PAX3, and PAX4 printers only.
Values:
E =
 enable
D =
 disable
Default:
D
b =
 labels per roll
This parameter is for XiIIIPlus, PAX3, and PAX4 printers only.
Values:
100
 to
9999
Default:
900
c =
 media replaced
This parameter is for XiIIIPlus, PAX3, and PAX4 printers only.
Values:
Y =
 yes
N =
 no
Default:
N
d =
 ribbon length
This parameter is for XiIIIPlus, PAX3, PAX4, and ZE500 printers only.
Values:
XiIIIPlus series printers:
N = 0M
0 =
 100M
1 =
 150M
2 =
 200M
3 =
 250M
4 =
 300M
5 =
 350M
6 =
 400M
7 =
 450M
PAX series printers:
N = 0M
0 =
 100M
1 =
 150M
2 =
 200M
3 =
 250M
4 =
 300M
5 =
 350M
6 =
 400M
7 =
 450M
10 =
 600M
11 =
 650M
12 =
 700M
13 =
 750M
14 =
 800M
15 =
 850M
16 =
 900M
ZE500 series printers:
N = 0M
0 =
 100M
1 =
 150M
2 =
 200M
3 =
 250M
4 =
 300M
5 =
 350M
6 =
 400M
7 =
 450M
10 =
 600M
Default:
1 - for 96XiIIIPlus
7 - for all other printers
e =
 ribbon replaced
This parameter is for
Xi
III
Plus
,
PAX
3, and
PAX
4 printers only.
Values:
Y =
 yes
N =
 no
Default:
N
f =
 early warning maintenance
This parameter is for Xi4, RXi4,
PAX
4, ZM400, ZM600, RZ400, RZ600, and S4M printers only.
Values:
E =
 enabled
D =
 disabled
Default:
D
On G-Series printers, this parameter must be enabled for the
^MA
 driven system to work.
g =
 head cleaning interval
Accepted value exceptions: accepted values for
Xi
III printer are 100M through 450M; accepted values for 600 dpi
Xi
III printers are 100M through 150M; accepted values for
PAX
4 series printers are up to 900M by increments of 50M; accepted values for ZM400/ZM600, RZ400/RZ600, and S4M printers are 0M through 450M.
Values:
0 =
 100M
1 =
 150M
2 =
 200M
3 =
 250M
4 =
 300M
5 =
 350M
6 =
 400M
7 =
 450M
8 =
 500M
9 =
 550M
10=
 600M
11 =
 650M
12 =
 700M
13 =
 750M
14 =
 800M
15 =
 850M
16 =
 900M
Default:
1 - for 96XiIIIPlus
7 - for all other printers
h =
 head clean
Values:
N =
 No
Y =
 Yes
Default:
N
i =
 head life threshold
Values:
0 – 0 in or off100-3500000 in
Default:
 1000000
j =
 head replaced
Values:
N =
 no
Y =
 yes
Default:
N
Comments:
 To permanently save the changes to the
^JH
 command, send
^XA^JUS^XZ
.