1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Commands
  3. ^SO
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^SO

^SO

The
^SO
 command is used to set the secondary and the tertiary offset from the primary Real-Time Clock.

Set Offset (for Real-Time Clock)

For each label only one
^SO2
 command can be used. If more than one offset is required,
^SO3
 must be used.
Format:
^SOa,b,c,d,e,f,g
Parameters
Details
a =
 clock set
Values:
2 =
 secondary
3 =
 third
Default:
 value must be specified
b =
 months offset
Values:
–32000
 to
32000
Default:
0
c =
 days offset
Values:
–32000
 to
32000
Default:
0
d =
 years offset
Values:
–32000
 to
32000
Default:
0
e =
 hours offset
Values:
–32000
 to
32000
Default:
0
f =
 minutes offset
Values:
–32000
 to
32000
Default:
0
g =
 seconds offset
Values:
–32000
 to
32000
Default:
0
For more detail on set offset, see Real Time Clock.