1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Wireless Commands
  3. ^KC
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^KC

^KC

The
^KC
 command allows the print server to have its own client identifier (CID).

Set Client Identifier (Option 61)

Format:
^KCa,b,c,d
Parameters
Details
a =
enable or disable
Values:
0 =
disable (default)
1 =
enabled, use MAC address
2 =
enabled, ASCII value
3 =
enabled, HEX value
Default:
0
b =
device
Values:
0 =
all devices
1 =
wireless
2 =
external wired
3 =
internal wired
Default:
1
c =
prefix (optional)
Values:
11 ASCII characters or 22 hexadecimal values.
The prefix can be cleared by defaulting the network settings on the printer.
d =
identifier
Values:
60 ASCII characters or 120 hexadecimal values. Minimum field length is 2 bytes.
The suffix can be cleared by defaulting the network settings on the printer.
This applies only to the Xi4, RXi4, ZM400, ZM600, RZ400, or RZ600 printers when it is used with the external ZebraNet 10/100 print server using firmware v1.1.5 or later.