1. ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
  2. ZPL Wireless Commands
  3. ^WP
  • ZPL II, ZBI 2, Set-Get-Do, Mirror, WML Programming Guide
^WP

^WP

Use this command to set the four-digit wireless password (not the same as the general printer password). If the wireless password is
0000
, the Wireless and Wireless Plus print servers run in an “unprotected” mode, which means that you do not need to enter the wireless password through the control panel to view or modify wireless settings.

Set Wireless Password

This command does not apply to the S4M.
If a wireless password is set, the values for the following parameters will not appear through the control panel until the wireless password is entered:
  • MAC Address
  • ESSID
  • WLAN Security
  • WEP Type
  • WEP Index
  • Reset Network
Format:
^WPa,b
Parameters
Details
a
 = old wireless password
Values:
0000 through 9999
Default:
0000
b
 = new wireless password
Values:
0000 through 9999
Default:
0000